Wireless DA600+ Latching Siren Assembly with Adjustable Siren & Blue Flashing LED

DA600+ Long Range Wireless Panic Alarm Assembly with a built in latching adjustable Siren & Blue Flashing LED, used in Panic Alarm Systems.

This Siren & Flashing Strobe Assembly will latch ON when triggered and requires at least one Reset Button for correct operation, the options include:

• 300 metre Wireless Push Button, ref 004-2940.
• 900 metre Wireless Push Button, ref 006-2200.
• Or we can fit a physical switch on the assembly for applications where it is safe to do so (for example if the assembly is located in a manned office or reception), please Contact Us for Advice.  

The transmission range from a suitable Transmitter is from 900 ft to 2700 ft (line of sight) depending on which transmitter is chosen (most are 2700 ft), this can be at least doubled by adding the Signal Repeaters (004-2910).

There are many Transmitters that can be used with this Wireless Siren Box, these include:

• 2700 ft Single Push Button (006-2200).
• 2700 ft Single Push Button & Lanyard (006-2220).
• 2700 ft Double Push Button (006-2210).
• 2700 ft Double Push Button & Lanyard (006-2230). 
• 900 ft Under Desk Button (004-2940).
• 2700 ft Large Red SOS Wireless Push Buttons.
• 2700 ft Large Red Lockdown Wireless Push Buttons.
• 2700 ft Large Red Help Wireless Push Buttons.
• 2700 ft Large Red Assistance Wireless Push Buttons.
• 2700 ft Please Ring Wireless Push Button Assembly (006-2800).
• 1B - 2B - 3B Perimeter Beams.
• 900 metre & 600 metre PIR's.
• Internal Curtain & Standard PIR's.

The unique Built in Siren has 32 available Tones together with Volume Control allowing you to utilize the Control Box for your individual requirements. 

Operation:

In the event of an activation from a Transmitter, the Siren & Flashing LED will Latch ON until reset.

Additional Siren Boxes:

You can add as many Siren Control Boxes to your System as required (no limit), each one can be adjusted to suit the exact location of its installation, you may wish to have some a very with low volume and a flashing LED whilst others set to be loud.

It is also possible to connect a wired Siren & Flashing Strobe Boxes to each Wireless Siren Box for applications where rooms may be back to back. 

Installation:

These Wireless Siren Alarm Panels are designed for easy installation, they will be fully prepare before  despatch, all the customer needs to do is:

• Mount the Control Box (handy lugs for easy & quick fitting).
• Pair the Box to the chosen Panic Buttons (new systems would be done before despatch).
• Power the Control Box.
• Choose the Siren Tone & Volume (simple and quick adjustments).
• Test.

Compatible with all DA600+ Wireless Alarm Systems !!

• 1 x 'S' Type Wireless Receiver.
• 1 x Latching Adjustable Siren.
• 1 x Flashing Blue LED.
• 1 x Mounting Box.
• 1 x Power Supply.

• Size: 9" x 7.5" x 2.8" (not including Strobe).
• Box Material: Plastic.
• Box Mounting Method: Handy Mounting Lugs with Pre-drilled Holes.
• Wireless Operating Range: 900 - 2700 ft - line of sight (depending on the chosen transmitter).
• Repeater Option: Yes (available as an optional option).
• Siren: Adjustable in Tone (32 options) & Volume Control.
• Volume Level: 106 Decibel to Zero.
• Receiver: 'S' Type.
• Flashing Strobe: Blue.
• Duration of Siren & Flashing Strobe LED: Latches ON (until reset).
• Power Supply: Plug in Transformer.
• Backup Battery: No (available as an optional option).
• Weatherproof: Yes.