Additional DA600+ Bell Receiver Kit

Additional Wireless DA600+ Bell Receiver Kit for the Long Range 2700 ft Wireless DA600+ Bell Systems, for applications that require a second or third Bell. These can be mounted both inside & outside.

This Bell Receiver Kit has been designed for Easy & Quick Installation, the installation process is shown below:

• Pair the Wireless Receiver with the Wireless Transmitter (if you are purchasing this with the complete system this will be done for you in the factory).
• Mount the weatherproof Bell Kit (4 x screws) within 2700 ft (line of sight) of the Transmitter.
• Plug in the 2-pin Transformer supplied.

Bell Kit:

The loud (85 decibel) weatherproof Bell is fitted onto a mounting box for easy installation, inside this box is a Wireless Receiver which is powered by a standard 2-pin Plug in U.S Transformer. The Bell has been programmed to operate for 10 seconds each time the Push Button is pressed, this time can be increased to 60 seconds or 5 minutes if required.

The operating distance between the Bell Kit & signal Wireless Repeater is an impressive 2700 ft (line of sight), which equates to around 1000 - 1800 ft in most applications, this can be at least doubled by adding the Signal Repeater (004-2910).

You can also add a further 3 more Signal Repeaters.

If you need any advice, please Contact Us for Friendly, No Obligation Advice !!

Please Note: Compatible with all DA600+ Alarms !!

• 1 x Long Range Bell S Receiver.
• 1 x Mounting Box.
• 1 x 85 Decibel Bell.
• 1 x Plug in Transformer.

• Power Supply: Plug in Transformer.
• Power Supply Input: 12v DC (1 amp).
• External: Yes.
• Size: 7.8" x 3.5" x 1.75".
• Mounting Bracket: 4 x Holes.
• Volume: Approx 85 Db.
• Bell Duration: 10 seconds (can be changed to 1 - 60 seconds or 10 minutes).