KP Gate Contact Kit

Battery Powered, KP Wireless Gate Contact Kits, designed to help secure an external gate, working in conjunction with our full range of KP Wireless Alarm Systems.

The gate can be located up to 300 ft away from the alarm receiver (with no obstructions), with typical obstructions 90 - 150 ft would be more realistic (further distance can be achieved if a wireless signal repeater, part number 005-0760 can be located between the gate and receiver).

This Wireless Gate Kit, can also be used in detached buildings which are susceptible to damp conditions.

The magnetic switch is normally fitted onto the gate post with the magnet being fitted onto the actual gate, the switch is connected to the battery powered transmitter & weatherproof box by 12" of cable sleeved in a steel protected cover, should the cable be cut the alarm would be triggered. 

• 1 x Battery Powered Transmitter.
• 1 x Steel Contact.
• 1 x Magnetic Switch.
• 1 x Lithium Battery.
• 1 x Weatherproof Box.
• 4 x Mounting Screws.

• Magnetic Switch Size: 4" x 1.4" x .4".
• Magnet Size: 4" x .6" x .6".
• Internal Transmitter Size: 2.8" x 1.4" x .6".
• Armoured Cable Length (between the Transmitter & Switch): 12".
• Weatherproof Box Size: 4.2" x 4.2" x 2.2".
• Power Supply: 1 x 12v MN21
• Battery Life: 12 - 18 months (depending on use).

Installation Method:

1. Fit the magnetic switch onto a gate frame.
2. Fit the magnet onto the gate (both the magnet and switch need to be nearly touching when the door is closed).
3. Place the battery powered transmitter into the weatherproof box.
4. Mount the weatherproof box.