1B-60 Solar Powered Wireless Perimeter Beams (DA600+) & Protective Wire Cage.

Additional Solar Powered Wireless 1B-60 Perimeter Detector Beams supplied with a Protective Wire Cage, the Beams have built in Dual Detection Technology, 180 ft Detection & 1000 ft Transmission.

The Protective Wire Cage helps to protect the Beams from potential Intruders trying to misalign, vandalise or steal the Beams.

Please Note:

The Cages are supplied with Security Screws (Torx T30 Tamper Proof), you will need a TX30 Bit (with hole) to use them, these are available from many outlets or can be found in some existing tool kits.

We can also supply them Here.

These Laser Beams are designed to operate with our Perimeter Alarms, the features include:

• Work with all DA600+ products.
• Battery Powered with Built in Solar Charging: (making for easy installation).
• The Beams will charge in nearly all conditions.
• Dual Detection Technology: (prevents false alarms from small animals and moving debris).
• 180 ft Detection.
• 1000 ft Wireless Transmission Range (equates to approximately 200 metres in most applications). 
• Quality Build.
• Supplied with Wall & Pole Mounting Brackets.
• Built in Level to for easy Installation.
• Top up charging Ports: (ideal for the occasional maintenance charge in winter).
• Will operate with all the following Receivers:
  • 004-2790 (plug in receiver with relays).
  • 004-2810 (solar siren and receiver).
  • 004-4500 (simple plug in chime receiver).
  • 004-5100 (simple chime receiver with usb cable).
  • 004-3900 (portable pager).

The Dual Detection Technology works by having a pair of Detectors (set 2 1/4" apart from each other) on each Beam, both Detectors have to be breached simultaneously to create an activation, allowing small animals, insects, leaves & debris to safely pass by. 

Charging:

The Beams have a built in Battery which are charged & maintained by the built in Solar Panels during daylight hours.

They are also supplied with an additional Charging Port which can be used to give the Beams a boost charge should you experience a lengthy duration of low sun light, or perhaps one of the beams needs to be fitted into a slightly covered location, alternatively you can add an additional Solar Panel (004-2990) which can be positioned in a more productive location or direction. 

They are very easy to install and have built in viewers and spirit levels to aid installation.

Multiple sets of these Laser Beams can be used with all Receivers (check the receiver specifications) and they can also be used in conjunction with all the other types of Sensors from this Alarm range (contact us for advice).

Please Note: Work in conjunction with all DA600+ products !!

• 1 x Set of 1B-60 Beams.
• 1 x Set of Fixing Brackets.
• 2 x Protective Wire Cages.

Beams:

• Beam Size: 10 1/2" x 3 3/8" x 1 3/4".
• Power Supply: Built in Batteries.
• Charging Method: Built in Solar Panels.
• Mounting Methods: Wall or Pole.
• Detection Range: 180 ft.
• Transmission Range: 1200 ft (line of sight). 
• Frequency: 433 Mhz.
• IP Rating: IP66.
• Distance Between Detection Beams: 60mm.
• Number of Beams: 1 set.
• Charging Port: 9 - 12v DC (500 m/A to 1 amp).

Cage:

• Material: Steel Wire 1/8" Diameter.
• Finish: Black Plastic Coating.
• Size: 15 3/8" x 4 3/8" x 6 1/8".
• Fixing Brackets: 4 (3/16" Diameter Screw Holes).