Long Range Solar PIR Driveway Alarm Kit

Long Range (2700 ft) Wireless DA600+ Solar Powered Driveway Alarm Kit

Ultra Secure

004-3650

New

Long Range (2700 ft) Wireless Solar Powered DA600+ Driveway Alarm PIR System.

More details

$267.60

(excluding all taxes)
Visa
Mastercard
Sagepay
Paypal
100% Secure Payment
97% Customer Satisfaction
Technical Help-line
30 Day Money Back Guarantee

Long Range (2700 ft) Wireless DA600+ Driveway Alarm System supplied with:

  • 1 x Long Range Wireless Solar Powered PIR.
  • 1 x Solar Panel & Cable (allows you to fit the solar panel in a different direction or location of the PIR).
  • 1 x Plug in 4-Channel Receiver.
  • 2 x Remote Controls.

Ideal to help monitor and protect your Driveway, Garden, Yard & Outbuildings.

The range between the PIR & Indoor Receiver is an impressive 2700 ft (line of sight) which equates to around 1200 - 1800 ft in most applications, this distance can be doubled by adding a Signal Repeater (004-2910).

Receiver:

The Indoor 4 - Channel Wireless Receiver is powered by a standard 2-pin U.S Plug in Transformer and has the following features:

  • 4 x Adjustable Dry Relay N/O or N/C Outputs (often used to trigger auto-diallers, timer relays).
  • Adjustable 12v DC Outputs (often used with sirens & flashing lights).
  • ON/OFF Switch.
  • Volume Control.
  • 5 minute Exit Delay Possible: (using remote control or receiver).
  • Will work with up to 128 sets of Detectors.
  • Optional Reminder Bleeps.
  • Exit Delay Option.

Wireless PIR:

The Detection range of the PIR is 60 ft (which can be reduced by choosing one of the other  three sensitivity settings) and the detection width is approximately 15 degrees but with a narrow depth.

By fitting the PIR about 3 - 5 ft from the ground, it is possible to avoid detecting small ground animals (providing you mount the PIR horizontal to the ground).

It is powered by a built in Battery which is charged and maintained by the Solar Panel supplied, this Solar Panel comes with its own mounting bracket and 3 ft of Cable which is plugged into the back of the PIR.

The benefit of having a separate Solar Panel is that it allows you to fit the PIR in the most suitable position for Detection whilst positioning the Solar Panel in the best location for daylight (to charge the PIR).

You could also connect a charger into the back of the PIR for locations with access to power, or use this port to give the PIR an occasional boost charge if it is mounted in a shady location.

The PIR is supplied with an easy to mount wall bracket.

Remote Controls:

The Remote Controls allow you to pause the Receiver for 5 minutes to allow you to leave the premises without activating the system (designed for use when there are Sirens, Bells & Auto-Diallers attached).

It also allows you to trigger the Receiver using it as a Panic Button (useful again when accessories are connected).

Additional Accessories:

Please Note: Compatible with all DA600+ products.

A unique Wireless Driveway Alarm System, if you need Advice Please Contact US for Friendly, No Obligation Advice !!

If you need assistance in selecting the right product for your personal needs or support after making a purchase, please do not hesitate to contact us:
Contact us
Our opening times: Monday-Friday 8:00am-5:00pm
  • 1 x Solar Powered 2700 ft Wireless PIR.
  • 1 x Solar Panel.
  • 1 x 4 - Channel Wireless Receiver.
  • 1 x Plug in Transformer.
  • 1 x Set of mounting Brackets.
  • 2 x Remote Controls.

Receiver:

  • Receiver Size: 6.2" x 4.2" x 1.5".
  • Power Supply: 15v DC 1amp (plug in transformer).
  • ON/OFF Button: Yes.
  • Adjustable Volume Control: Yes.
  • Available Channels: 4.
  • Max sets of Beams per Channel: 32.
  • Maximum sets of Detectors per Receiver: 128.
  • Output Voltage: 12v DC.
  • Output Voltage Duration: 1, 10, 60 second & 5 minutes.
  • Built in Chimes: Yes (one per channel).
  • Reminder Bleep: Yes (if programmed).
  • Exit Delay: Yes 5 minutes (if programmed).
  • Frequency: 434.6 MHz.
  • Standby Current: 20 mA.
  • Alarm Current: 180 mA.
  • Relay Rating: 24v DC or 120v AC (2 amp).
  • Wireless Working Range: Up to 2700 ft line of sight (depending on which sensor or beam is being used).

PIR:

  • Power Supply: Built in 3.3v LiFEPO4 Battery (500 mAh).
  • Charging Method: Separate Solar Panel.
  • Wireless Range: 2700 ft (line of sight).
  • Detection Range: 60 ft (adjustable).
  • Detection Angle: 15 degrees.
  • Size of PIR: 5" x 3.5" x 5".
  • Size of Solar Panel with Bracket: 7.5" x 6" x 5".
  • Frequency: 433 MHz.
  • Working Temperature: -22 + 158 Fahrenheit.
  • Solar Panel Output Current: 200mA (bright days).
  • Sensitivity Settings: 3.
    • Low Setting: Press ON/OFF Button 3 times to Turn ON.
    • Medium Setting: Press ON/OFF Button 4 times to Turn ON.
    • High Setting: Press ON/OFF Button 5 times to Turn ON.