Wireless Outdoor Alarm System

Outdoor Wireless DA600+ Solar Powered PIR & Perimeter Beam Alarm Kit

Ultra Secure

004-3700

New

Wireless Solar Powered DA600+ PIR & Perimeter Beam System, an example of how you can use Perimeter Beams & PIR's within a single Outdoor Alarm System.

More details

$468.49

(excluding all taxes)
Visa
Mastercard
Sagepay
Paypal
100% Secure Payment
97% Customer Satisfaction
Technical Help-line
30 Day Money Back Guarantee

Wireless Solar Powered DA600+ Outdoor Alarm System supplied with:

  • 1 x Long Range 1B Perimeter Beam Set (can protect up to 300 ft between Beams which can be up to 2700 ft away from the Indoor Receiver).
  • 1 x Medium Range (1800 ft transmission) Wireless Solar Powered PIR.
  • 1 x Plug in 4-Channel Receiver.
  • 2 x Remote Controls.

Compatible with all DA600+ products !!

This is an example of how you can use both the Solar PIR's (900 or 600 metre models) together with any of the Solar Perimeter Beams (1B2B or 3B) to make an Outdoor Alarm System to suit your requirements.

You can also add may other accessories to the system (see list below).

Wireless Transmission Range:

The range between the 1B Beams to the Indoor Receiver is an impressive 2700 ft (line of sight) which equates to around 1200 - 1800 ft in most applications, the range between the PIR and Receiver is 1800 ft (line of sight) which equates to around 600 - 1200 ft in most applications.

These distances can be doubled by adding a Signal Repeater (004-2910).

Receiver:

The Indoor 4 - Channel Wireless Receiver is powered by a standard 2-pin U.S Plug in Transformer and has the following features:

  • 4 x Adjustable Dry Relay N/O or N/C Outputs (often used to trigger auto-diallers, timer relays).
  • Adjustable 12v DC Outputs (often used with sirens & flashing lights).
  • ON/OFF Switch.
  • Volume Control.
  • 5 minute Exit Delay Possible: (using remote control or receiver).
  • Will work with up to 128 sets of Detectors.
  • Optional Reminder Bleeps.
  • Exit Delay Option.

1B Beams:

These impressive Solar Powered Wireless Perimeter Beams are packed with impressive features (listed below) and work in conjunction with either of the Wireless Receivers (indoor 004-2790, 004-2880) & (solar outdoor 004-2810), perfect for protecting the outside of homes, farms & businesses:

  • Battery Powered with Built in Solar Charging: (making for easy installation).
  • Dual Detection Technology: (prevents false alarms from small animals and moving debris).
  • 300 ft Detection: (covers more are with less detectors).
  • Sensitivity Settings.
  • Impressive 2700 ft Wireless Transmission Range: 
  • Quality Build.
  • Supplied with Wall & Pole Mounting Brackets.
  • Test Lights: (for easy installation).
  • Top up charging Ports.

The Dual Detection Technology works by having a pair of Detectors (set 2" apart from each other) on each Beam, both Detectors have to be breached simultaneously to create an activation, allowing small animals, insects, leaves & debris to safely pass by. There are a pair of detectors on each size of Beam. 

The External Beams are also supplied with an additional Charging Port which can be used to give the Beams a boost charge should you experience a lengthy duration of low sun light, or perhaps one of the beams needs to be fitted into a slightly covered location. 

They are very easy to install as they have a built in Red Glow Light (for easy lining up).

You can use up to 128 sets of Beams & PIR's with the Internal Receiver & 32 sets with the Solar Wireless Siren, you can mix & match by using a selection of different sizes of Beams within one single system.

Wireless PIR:

The Detection range of the PIR is 45 ft (which can be reduced by choosing one of the other  three sensitivity settings) and the detection width is approximately 15 degrees but with a narrow depth.

By fitting the PIR about 3 - 6 ft from the ground, it is possible to avoid detecting small ground animals (providing you mount the PIR horizontal to the ground).

It is powered by a built in Battery which is charged and maintained by the top mounted Solar Panel, there is also an additional charging port in the back of the PIR for applications where the PIR may need the occasional boost charge (shady areas etc).

The PIR is supplied with an easy to mount wall bracket.

The PIR is a nice and compact size making it easy to hide away in the installation.

Remote Controls:

The Remote Controls allow you to pause the Receiver for 5 minutes to allow you to leave the premises without activating the system (designed for use when there are Sirens, Bells & Auto-Diallers attached).

It also allows you to trigger the Receiver using it as a Panic Button (useful again when accessories are connected).

Additional Accessories:

You can add many additional accessories to this Driveway Alarm System building it to your specific applications, the wide range of options include the following, but there are many more:

A unique Wireless Driveway Alarm System, if you need Advice Please Contact US for Friendly, No Obligation Advice !!

If you need assistance in selecting the right product for your personal needs or support after making a purchase, please do not hesitate to contact us:
Contact us
Our opening times: Monday-Friday 8:00am-5:00pm
  • 1 x Solar Powered 1800 ft Wireless PIR.
  • 1 x Solar Powered 1B Perimeter Laser Beams.
  • 1 x 4 - Channel Wireless Receiver.
  • 1 x U.S Plug in Transformer. 
  • 1 x Set of mounting Brackets.
  • 2 x Remote Controls.

Receiver:

  • Receiver Size: 6.2" x 4.2" x 1.5".
  • Power Supply: 15v DC 1amp (plug in transformer).
  • ON/OFF Button: Yes.
  • Adjustable Volume Control: Yes.
  • Available Channels: 4.
  • Max sets of Beams per Channel: 32.
  • Maximum sets of Detectors per Receiver: 128.
  • Output Voltage: 12v DC.
  • Output Voltage Duration: 1, 10, 60 second & 5 minutes.
  • Built in Chimes: Yes (one per channel).
  • Reminder Bleep: Yes (if programmed).
  • Exit Delay: Yes 5 minutes (if programmed).
  • Frequency: 434.6 MHz.
  • Standby Current: 20 mA.
  • Alarm Current: 180 mA.
  • Relay Rating: 24v DC or 120v AC (2 amp).
  • Wireless Working Range: Up to 2700 ft line of sight (depending on which sensor or beam is being used).

 Beams:

  • Beam Size: 13.4" x 5" x 1.8".
  • Power Supply: Re-chargeable Lithium Batteries.
  • Charging Method: Built in Solar Panels.
  • Mounting Methods: Wall or Pole.
  • Detection Range: 300 ft.
  • Transmission Range: 2700 ft (line of sight).
  • Frequency: 433 Mhz.
  • IP Rating: IP66.
  • Distance Between Detection Beams: 2.2".
  • Number of Beams: 1 set.
  • Charging Port: 9 - 12v DC (500 m/A to 1 amp).

PIR:

  • Power Supply: Built in 3.3v LiFEPO4 Battery (500 mAh).
  • Charging Method: Top Mounted Solar Panel.
  • Wireless Range: 1800 ft (line of sight).
  • Detection Range: 45 ft (adjustable).
  • Detection Angle: 15 degrees.
  • Size: 4" x 3.5" x 5.5".
  • Frequency: 433 MHz.
  • Working Temperature: -22 - +158 Fahrenheit.
  • Solar Panel Output Current: 100mA (bright days).
  • Sensitivity Settings: 3.
    • Low Setting: Press ON/OFF Button 3 times to Turn ON.
    • Medium Setting: Press ON/OFF Button 4 times to Turn ON.
    • High Setting: Press ON/OFF Button 5 times to Turn ON.