Long Range 800 metre Protect 800 Wireless Doorbell Kit with H/D 'Please Ring' Push Button

Long Range (2400 ft) Protect 800 Warehouse Wireless Bell Kit, supplied with a Loud Wireless Bell, Heavy Duty Push Button (with please ring etched onto it) & a Battery powered Transmitter mounted inside a weatherproof box.

Ideal for many applications including:

• Gated Entrances.
• Warehouses.
• Farms.
• Business Premises.

The Transmission range between the Battery Transmitter & Receiver is an impressive 2400 ft (line of sight), which equates to around 1000 - 1800 ft in most applications.

The Heavy Duty Steel Push Button is connected to the Wireless Transmitter by 10 ft of cable (which could be lengthened), the transmitter is mounted into a fully weatherproof box making it idea for mounting onto the rear of a Gatepost or simply on the other side of a factory wall.

The V range Wireless Transmitter is powered by a 3v CR123A Battery (supplied) making installation Easy & Quick.

Additional Transmitters & Push Buttons could be added for additional entrances.

The Wireless Bell assembly can be mounted either Indoors or Outdoors, and is powered by a 2-pin plug in transformer, additional Bells can be added (there is no limit), together with the option of adding Wireless Chime Receivers which may be suitable in offices or homes.

Operation:

When the H/D Push Button is pressed, the Receiver will activate the 85 Decibel Bell for either 5, 30 & 60 seconds.

Installation Guide:

These Bell Systems are very Easy to Install, the basic process would be:

1. Mount the H/D Push Button.
2. Mount the Battery Transmitter & Box (4 x Screws).
3. You may need to Remove the Cable between the Push Button & Transmitter Box to guide it through a hole in a Wall or Post (the cable can be lengthened or shortened to suit the installation).
4. Mount the Bell Assembly (4-screws).
5. Connect the Plug in Transformer into a standard 3-pin wall socket.

Additional Accessories:

You could add a multitude of additional accessories with this Bell System, options include:

• Additional Bells.
• Chime Receivers.
• Portable Push Buttons.
• Indoor Push Buttons.
• PIR's.
• Wall SOS Buttons.

Please Contact Us for Advice !!

• 1 x H/D Push Button.
• 1 x V range Transmitter & Mounting Box.
• 1 x Plug in Wireless Bell Assembly.
• 1 x 2-pin U.S Transformer.
• 1 x 85 Decibel Bell.
• 1 x 10 ft Bell Cable. 

Wireless Bell Receiver:

• Power Supply: 2-pin U.S Plug in Transformer.
• Power Supply Input: 12v DC (1 amp).
• External: Yes.
• Size: 6" mm Diameter x 2 1/4" Deep.
• Mounting Bracket: 4 x Holes.
• Volume: Approx 85 Db.
• Bell Duration: 30 seconds (can be changed to 5, 30 & 60 seconds or 10 minutes).

Wireless Transmitter:

• Wireless Range: 2400 ft (line of sight).
• Power Supply: 1 x 3v Lithium CR123A Battery.

Transmitter Mounting Box:

• Material: Plastic.
• Weatherproof: IP65.
• External Size: 8" (L) x 3 1/2" (W) x 1 3/4" (D).

Bell Specification:

• Power Supply: 12v DC.
• External: Yes.
• Size: 6" Diameter x 2 1/4" Deep.
• Mounting Bracket: 4 x Holes.
• Volume: Approx 85 Decibel.

Push Button Specification:

• Material: Steel.
• Size: 3 3/8" (L) x 1 3/4" (W) x 1 1/2" (D)
• Contact Type: NO or NC.
• Sealed Wired Contacts.
• Words: Please Ring.